BSOP-326 Week 7 Fujiyama Electronics Case Study
Fujiyama Electronics Case Study - Due Week 7
Objective | Project Deliverables | Grading Rubrics| Best Practices
This case study looks at the behavior of a circuit board process though the use of Control Charts. At least two Control Charts will need to be constructed, and from them you will be asked to provide an assessment of what you see. A template to facilitate the construction of the Control Charts has been provided. You are not required to use this template. A tutorial that outlines the steps for this case is located in Doc Sharing.
Fujiyama Electronics, Inc. has had difficulties with circuit boards purchased from an outside supplier. Unacceptable variability occurs between two drilled holes that are supposed to be 5 cm apart on the circuit boards. Thirty samples of four boards each were taken from shipments from the supplier as shown in the data from the worksheet. Data in the worksheet below can also be assessed here.